Atualização
Enviado: 03 Jul 2010, 07:45
Gostaria de saber se eu poderia instalar uma versão mais antiga e atualizar para a versão atual da distro?
Assim como varias outras distros, remasterizadas, o KDuXP "ainda não tem este recurso" apesar de ser facil implementar um live-update nele, como faziamos no ResuLinux......e no kurumin......dnielc escreveu:Gostaria de saber se eu poderia instalar uma versão mais antiga e atualizar para a versão atual da distro?
Um dos meus maiores problemas é não ter o Hardware proprio para a necessidade de cada um, tentarei verificar se falta alguma coisa que eu possa ja incluir para ajudar a solucionar, no entanto é mais tentativa e erro , como já disse aqui varias vezes , se a configuração do hardware é meia especifica, não sera fácil eu deixar ela funcionando sem o hardware....mas vamos tentar, vou ler assim que possível tento achar uma solução e se achada posto por aqui ou chamo você no msn, ja me deixe cadastrado ai....para irmos conversando e quando eu puder veremos juntos ai postamos aqui a solução......jstefferson escreveu:Olá!!
O meu problema é o seguinte: Instalei o KDUXP em casa, maravilha, roda beleza. Porém, todavia, no entanto (rsrsrsrs), instalei no meu trabalho também: problema: no serviço tenho duas internetes, ADSL e WIFI, as duas administradas pela CELEPAR, a ADSL nem adianta querer abrir para atualizações e novas instalações on line, a WIFI aceita, mas, não consigo configurar, as instruções que recebo da CELEPAR é para o DEBIAN Lenny (se não me engano) muito antigo, inclusive a CELEPAR tem uma distribuição própria que é baseado no DEBIAN bruto. na hora de configurar eles pedem: WPA2 empresarial; PEAP protegido; usuario e senha; e pede o AES também, mas nessas novas versões não tem onde escolher esse AES; se alguem puder dar uma olhada no TUTORIAL deles e ver o que estou fazendo de errado eu agradeço muito, a página é http://www.fecea.br lá tem o link para internet sem fio e dentro tem o tutorial para linux.
Desde já agradeço.
P.S. só conseguindo configurar o wifi é que conseguirei manter meu sistema atualizado e poderei convencer eles a usarem o KDUXP em todas as máquinas, são mais de 300.
abraços
Postem as telas dela conectando numa maquina que funcione e depois as telas tentando usar o KDuXP, para poder comparar, postem tb seus lspci, lsusb, dmesg da maquina que funciona e da maquina que esta tentando usar o KDuXP para tb compararmos.....Roderickol escreveu:Estou com o mesmo problema do amigo de cima o Jeferson, inclusive na mesma faculdade, o cara que administra a wifi lá disse que só baixando a distribuição da CELEPAR chamada de Desktop Paraná.
Queria achar uma solução para conectar. Já tentei de todas as formas que conheço, mas sem sucesso.
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce G210M] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 4380 (rev 10)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 SD Host controller: Ricoh Co Ltd Device e822
04:00.1 System peripheral: Ricoh Co Ltd Device e230
04:00.3 FireWire (IEEE 1394): Ricoh Co Ltd Device e832
04:00.4 SD Host controller: Ricoh Co Ltd Device e822
roderickol@ubuntu:~$ lsusb
Bus 008 Device 002: ID 044e:3017 Alps Electric Co., Ltd
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 04e8:1f06 Samsung Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ca:18b5 Ricoh Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Vou tentar rodar o Desktop Paraná de novo pra ver se consigo obter o resto das informações.[ 226.872032] wlan0: no IPv6 routers present
[ 1080.032556] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1080.121798] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1088.553513] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1125.061345] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1125.120557] sky2 eth0: disabling interface
[ 1125.129401] sky2 eth0: enabling interface
[ 1125.129820] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1125.273912] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1127.351827] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.353755] wlan0: direct probe responded
[ 1127.353762] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.355432] wlan0: authenticated
[ 1127.355460] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.358457] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1127.358463] wlan0: associated
[ 1127.358936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1127.372052] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1127.481361] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.482746] wlan0: direct probe responded
[ 1127.482751] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.484331] wlan0: authenticated
[ 1127.484352] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.486293] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1127.486297] wlan0: associated
[ 1128.391782] type=1503 audit(1282702078.249:18): operation="open" pid=3934 parent=3907 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1138.124076] wlan0: no IPv6 routers present
[ 1144.928043] CE: hpet increasing min_delta_ns to 15000 nsec
[ 1197.170940] CPU0 attaching NULL sched-domain.
[ 1197.170945] CPU1 attaching NULL sched-domain.
[ 1197.192661] CPU0 attaching sched-domain:
[ 1197.192666] domain 0: span 0-1 level MC
[ 1197.192670] groups: 0 1
[ 1197.192678] CPU1 attaching sched-domain:
[ 1197.192681] domain 0: span 0-1 level MC
[ 1197.192685] groups: 1 0
[ 1197.908061] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1197.997274] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1198.068128] sky2 eth0: disabling interface
[ 1198.076780] sky2 eth0: enabling interface
[ 1198.077194] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1198.153328] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1198.261869] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1198.320268] sky2 eth0: disabling interface
[ 1198.329529] sky2 eth0: enabling interface
[ 1198.329933] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1200.280766] PM: Syncing filesystems ... done.
[ 1200.396584] PM: Preparing system for mem sleep
[ 1200.396588] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1200.397325] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1200.397372] PM: Entering mem sleep
[ 1200.397384] Suspending console(s) (use no_console_suspend to debug)
[ 1200.462390] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1200.608269] sd 0:0:0:0: [sda] Stopping disk
[ 1201.194326] PM: suspend of drv:sd dev:0:0:0:0 complete after 731.933 msecs
[ 1201.196223] btusb_intr_complete: hci0 urb dac53980 failed to resubmit (1)
[ 1201.197220] btusb_bulk_complete: hci0 urb dac53a80 failed to resubmit (1)
[ 1201.198221] btusb_bulk_complete: hci0 urb dac53a00 failed to resubmit (1)
[ 1201.619298] PM: suspend of drv:psmouse dev:serio2 complete after 391.177 msecs
[ 1201.724075] PM: suspend of drv:atkbd dev:serio0 complete after 104.724 msecs
[ 1201.726460] ACPI handle has no context!
[ 1201.727609] ACPI handle has no context!
[ 1201.727617] sdhci-pci 0000:04:00.4: PCI INT C disabled
[ 1201.727630] ACPI handle has no context!
[ 1201.745258] ACPI handle has no context!
[ 1201.761185] sdhci-pci 0000:04:00.0: PCI INT A disabled
[ 1201.776221] ath9k 0000:03:00.0: PCI INT A disabled
[ 1201.792098] sky2 eth0: disabling interface
[ 1202.256113] HDA Intel 0000:01:00.1: PCI INT A disabled
[ 1202.256216] ACPI handle has no context!
[ 1202.272080] PM: suspend of drv:HDA Intel dev:0000:01:00.1 complete after 463.985 msecs
[ 1202.423357] PM: suspend of drv:nvidia dev:0000:01:00.0 complete after 151.273 msecs
[ 1202.468098] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 1202.468108] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 1202.468118] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 1202.468127] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 1202.573382] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1202.588073] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 119.924 msecs
[ 1202.588082] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 1202.588092] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 1202.588101] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 1202.588110] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 1202.588385] PM: suspend of devices complete after 2190.680 msecs
[ 1202.588387] PM: suspend devices took 2.192 seconds
[ 1202.620232] PM: late suspend of devices complete after 31.840 msecs
[ 1202.620495] ACPI: Preparing to enter system sleep state S3
[ 1202.636011] Disabling non-boot CPUs ...
[ 1202.636029] CPU0 attaching NULL sched-domain.
[ 1202.636032] CPU1 attaching NULL sched-domain.
[ 1202.700014] CPU0 attaching NULL sched-domain.
[ 1202.701129] Breaking affinity for irq 9
[ 1202.701151] Breaking affinity for irq 17
[ 1202.701155] Breaking affinity for irq 18
[ 1202.701164] Breaking affinity for irq 22
[ 1202.701168] Breaking affinity for irq 23
[ 1202.804019] CPU 1 is now offline
[ 1202.804021] SMP alternatives: switching to UP code
[ 1202.810070] Extended CMOS year: 2000
[ 1202.810070] Back to C!
[ 1202.810070] CPU0: Thermal monitoring enabled (TM2)
[ 1202.810070] Extended CMOS year: 2000
[ 1202.810070] Enabling non-boot CPUs ...
[ 1202.810070] SMP alternatives: switching to SMP code
[ 1202.815768] Booting processor 1 APIC 0x1 ip 0x6000
[ 1202.809725] Initializing CPU#1
[ 1202.809725] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1202.809725] CPU: L2 cache: 2048K
[ 1202.809725] CPU: Physical Processor ID: 0
[ 1202.809725] CPU: Processor Core ID: 1
[ 1202.809725] CPU1: Thermal monitoring enabled (TM2)
[ 1202.904032] CPU1: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz stepping 0a
[ 1202.904085] CPU0 attaching NULL sched-domain.
[ 1202.932015] CPU0 attaching sched-domain:
[ 1202.932018] domain 0: span 0-1 level MC
[ 1202.932020] groups: 0 1
[ 1202.932023] CPU1 attaching sched-domain:
[ 1202.932025] domain 0: span 0-1 level MC
[ 1202.932027] groups: 1 0
[ 1202.932425] CPU1 is up
[ 1202.932898] ACPI: Waking up from system sleep state S3
[ 1203.140458] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0x80100, writing 0x8010b)
[ 1203.140464] pcieport 0000:00:01.0: restoring config space at offset 0xa (was 0xf, writing 0x0)
[ 1203.140468] pcieport 0000:00:01.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd8f1d8e1)
[ 1203.140471] pcieport 0000:00:01.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xd300c000)
[ 1203.140475] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0x200000f0, writing 0xd0d0)
[ 1203.140480] pcieport 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1203.140484] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.140515] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1203.140529] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0xe0e1)
[ 1203.140543] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.140565] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[ 1203.140579] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0xe0c1)
[ 1203.140593] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.140614] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x305)
[ 1203.140628] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0xe0a1)
[ 1203.140642] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.140672] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x305)
[ 1203.140692] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xd8d04c00)
[ 1203.140700] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 1203.140737] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[ 1203.140757] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xc0000004, writing 0xd8d00004)
[ 1203.140762] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 1203.140768] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 1203.140803] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 1203.140815] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd911d901)
[ 1203.140827] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 1203.140834] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.140884] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 1203.140896] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd931d921)
[ 1203.140909] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 1203.140915] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.140966] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[ 1203.140978] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd951d941)
[ 1203.140991] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 1203.140997] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.141047] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x405)
[ 1203.141060] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd971d961)
[ 1203.141072] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 1203.141079] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.141123] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 1203.141137] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0xe081)
[ 1203.141151] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.141173] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 1203.141187] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xe061)
[ 1203.141201] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.141222] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[ 1203.141236] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xe041)
[ 1203.141250] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.141279] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 1203.141298] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xd8d04800)
[ 1203.141306] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 1203.141355] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 1203.141456] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 1203.141568] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xd3000000, writing 0x0)
[ 1203.141646] HDA Intel 0000:01:00.1: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1203.141665] HDA Intel 0000:01:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3080000)
[ 1203.141671] HDA Intel 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.141677] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[ 1203.141960] sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1203.142013] sky2 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xd7900000)
[ 1203.142114] sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xc001)
[ 1203.142165] sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd7920004)
[ 1203.142193] sky2 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 1203.142242] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.142541] ath9k 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x104)
[ 1203.142568] ath9k 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd6500004)
[ 1203.142574] ath9k 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 1203.142583] ath9k 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 1203.142667] sdhci-pci 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1203.142697] sdhci-pci 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd5100a00)
[ 1203.142703] sdhci-pci 0000:04:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.142712] sdhci-pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 1203.142767] pci 0000:04:00.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 1203.142796] pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xd5100900)
[ 1203.142803] pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.142812] pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 1203.142866] ohci1394 0000:04:00.3: restoring config space at offset 0xf (was 0x400, writing 0x404)
[ 1203.142895] ohci1394 0000:04:00.3: restoring config space at offset 0x4 (was 0x0, writing 0xd5100000)
[ 1203.142902] ohci1394 0000:04:00.3: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.142911] ohci1394 0000:04:00.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 1203.142966] sdhci-pci 0000:04:00.4: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[ 1203.142994] sdhci-pci 0000:04:00.4: restoring config space at offset 0x4 (was 0x0, writing 0xd5100800)
[ 1203.143001] sdhci-pci 0000:04:00.4: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.143010] sdhci-pci 0000:04:00.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 1203.143428] PM: early resume of devices complete after 3.109 msecs
[ 1203.219941] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1203.219948] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1203.219972] usb usb3: root hub lost power or was reset
[ 1203.219993] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1203.220000] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1203.220042] usb usb4: root hub lost power or was reset
[ 1203.220064] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1203.220070] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1203.220094] usb usb5: root hub lost power or was reset
[ 1203.220114] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1203.220120] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1203.220133] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1203.220139] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1203.220177] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1203.220183] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1203.220206] usb usb6: root hub lost power or was reset
[ 1203.220227] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1203.220233] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1203.220257] usb usb7: root hub lost power or was reset
[ 1203.220278] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1203.220284] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1203.220306] usb usb8: root hub lost power or was reset
[ 1203.220337] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1203.220344] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1203.220358] pci 0000:00:1e.0: setting latency timer to 64
[ 1203.220373] ahci 0000:00:1f.2: setting latency timer to 64
[ 1203.548594] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1203.552745] ata2.00: configured for UDMA/100
[ 1203.643019] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 422.570 msecs
[ 1203.643590] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1203.643600] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 1203.646950] sky2 eth0: enabling interface
[ 1203.646994] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1203.647045] sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1203.647048] sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1203.647055] sdhci-pci 0000:04:00.0: setting latency timer to 64
[ 1203.707093] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[d5100000-d51007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1203.715155] sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 1203.715158] sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1203.715164] sdhci-pci 0000:04:00.4: setting latency timer to 64
[ 1204.044060] PM: resume of drv:usb dev:usb8 complete after 247.897 msecs
[ 1204.208063] usb 8-1: reset full speed USB device using uhci_hcd and address 2
[ 1204.359142] btusb 8-1:1.0: no reset_resume for driver btusb?
[ 1204.359144] btusb 8-1:1.1: no reset_resume for driver btusb?
[ 1204.548065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1204.548956] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1204.548959] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1204.548962] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1204.549901] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20090903/dsopcode-596)
[ 1204.549907] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.GTFB] (Node f703e498), AE_AML_BUFFER_LIMIT
[ 1204.549932] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.SPT0._SDD] (Node f703e3d8), AE_AML_BUFFER_LIMIT
[ 1204.549959] ata1.00: ACPI _SDD failed (AE 0x300a)
[ 1204.549961] ata1.00: revalidation failed (errno=-5)
[ 1204.608687] PM: resume of drv:usb dev:8-1 complete after 512.076 msecs
[ 1204.608723] sd 0:0:0:0: [sda] Starting disk
[ 1209.868060] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1209.868729] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20090903/dsopcode-596)
[ 1209.868735] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.GTFB] (Node f703e498), AE_AML_BUFFER_LIMIT
[ 1209.868759] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.SPT0._SDD] (Node f703e3d8), AE_AML_BUFFER_LIMIT
[ 1209.868786] ata1.00: ACPI _SDD failed (AE 0x300a)
[ 1209.868788] ata1.00: ACPI: failed the second time, disabled
[ 1209.921090] ata1.00: configured for UDMA/100
[ 1209.985081] PM: resume of drv:sd dev:0:0:0:0 complete after 5376.356 msecs
[ 1210.068225] PM: resume of devices complete after 6924.752 msecs
[ 1210.068529] PM: resume devices took 6.928 seconds
[ 1210.068565] PM: Finishing wakeup.
[ 1210.068566] Restarting tasks ... done.
[ 1212.768762] CPU0 attaching NULL sched-domain.
[ 1212.768767] CPU1 attaching NULL sched-domain.
[ 1212.804736] CPU0 attaching sched-domain:
[ 1212.804740] domain 0: span 0-1 level MC
[ 1212.804742] groups: 0 1
[ 1212.804746] domain 1: span 0-1 level CPU
[ 1212.804749] groups: 0-1 (cpu_power = 2048)
[ 1212.804754] CPU1 attaching sched-domain:
[ 1212.804756] domain 0: span 0-1 level MC
[ 1212.804758] groups: 1 0
[ 1212.804761] domain 1: span 0-1 level CPU
[ 1212.804763] groups: 0-1 (cpu_power = 2048)
[ 1213.784449] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1213.868137] sky2 eth0: disabling interface
[ 1213.884771] sky2 eth0: enabling interface
[ 1213.892113] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1214.080600] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1216.146564] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1216.147966] wlan0: direct probe responded
[ 1216.147972] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1216.149599] wlan0: authenticated
[ 1216.149627] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1216.151689] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1216.151695] wlan0: associated
[ 1216.152186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1216.172651] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1217.274599] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1217.275983] wlan0: direct probe responded
[ 1217.275988] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1217.277559] wlan0: authenticated
[ 1217.277587] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1217.280358] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1217.280364] wlan0: associated
[ 1218.199150] type=1503 audit(1282702170.624:19): operation="open" pid=4712 parent=4680 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1224.376059] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1224.427636] ------------[ cut here ]------------
[ 1224.427660] WARNING: at /build/buildd/linux-2.6.32/net/wireless/core.c:614 wdev_cleanup_work+0xa7/0xd0 [cfg80211]()
[ 1224.427665] Hardware name: VPCCW17FX
[ 1224.427667] Modules linked in: usb_storage rfcomm binfmt_misc sco ppdev bridge stp bnep l2cap joydev snd_hda_codec_realtek btusb snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss bluetooth snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd uvcvideo videodev v4l1_compat arc4 ath9k mac80211 ath cfg80211 nvidia(P) soundcore snd_page_alloc sdhci_pci sdhci led_class psmouse serio_raw sony_laptop lp parport vesafb ohci1394 video intel_agp ieee1394 output sky2 ahci agpgart
[ 1224.427740] Pid: 4440, comm: events/1 Tainted: P 2.6.32-24-generic #41-Ubuntu
[ 1224.427744] Call Trace:
[ 1224.427754] [<c014c4a2>] warn_slowpath_common+0x72/0xa0
[ 1224.427766] [<f80adea7>] ? wdev_cleanup_work+0xa7/0xd0 [cfg80211]
[ 1224.427777] [<f80adea7>] ? wdev_cleanup_work+0xa7/0xd0 [cfg80211]
[ 1224.427783] [<c014c4ea>] warn_slowpath_null+0x1a/0x20
[ 1224.427794] [<f80adea7>] wdev_cleanup_work+0xa7/0xd0 [cfg80211]
[ 1224.427801] [<c016376e>] run_workqueue+0x8e/0x150
[ 1224.427813] [<f80ade00>] ? wdev_cleanup_work+0x0/0xd0 [cfg80211]
[ 1224.427819] [<c01638b4>] worker_thread+0x84/0xe0
[ 1224.427825] [<c0167810>] ? autoremove_wake_function+0x0/0x50
[ 1224.427831] [<c0163830>] ? worker_thread+0x0/0xe0
[ 1224.427836] [<c0167584>] kthread+0x74/0x80
[ 1224.427841] [<c0167510>] ? kthread+0x0/0x80
[ 1224.427847] [<c0104087>] kernel_thread_helper+0x7/0x10
[ 1224.427851] ---[ end trace 42677bbe7b0f3279 ]---
[ 1225.682259] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1225.789883] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1225.864042] sky2 eth0: disabling interface
[ 1225.873146] sky2 eth0: enabling interface
[ 1225.873592] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1227.624049] sky2 eth0: disabling interface
[ 1229.716160] sky2 eth0: enabling interface
[ 1229.716409] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1231.761354] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1242.257339] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1242.324042] sky2 eth0: disabling interface
[ 1242.333165] sky2 eth0: enabling interface
[ 1242.333585] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1242.461931] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1244.534899] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.536827] wlan0: direct probe responded
[ 1244.536833] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.538435] wlan0: authenticated
[ 1244.538461] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.540576] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1244.540583] wlan0: associated
[ 1244.541051] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1244.561710] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1244.671415] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.672820] wlan0: direct probe responded
[ 1244.672826] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.674357] wlan0: authenticated
[ 1244.674378] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.676386] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1244.676391] wlan0: associated
[ 1245.582229] type=1503 audit(1282702198.008:20): operation="open" pid=4829 parent=4802 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1254.592089] wlan0: no IPv6 routers present
[ 1334.524058] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1334.605913] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1334.680573] sky2 eth0: disabling interface
[ 1334.689990] sky2 eth0: enabling interface
[ 1334.690456] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1341.422292] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1342.430942] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1342.430962] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1342.431051] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1342.434104] wlan0: direct probe responded
[ 1342.434109] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1342.436113] wlan0: authenticated
[ 1342.436142] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1342.438178] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1342.438181] wlan0: associated
[ 1342.438487] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1352.728072] wlan0: no IPv6 routers present
roderickol@ubuntu:~$