Internet no KDUXP 1.90 RC

[SuporteTecnicoID]

Não respondi antes pois estava aguardando a última versão do KDUXP, instalei em dual-boot com o WinXP e continuo com o problema da internet, faço a configuração mas ñ conecta.
Só consigo ter acesso utilizando o comando pppoeconf, mas sempre que reinicio o PC, preciso refazer a configuração.

Quando digito no terminal o comando poff -a retorna essa mensagem: operation not permitted

Refaz com o comando pppoeconf e depois de um cat /etc/network/interfaces para vermos como ele fica, e depois reinicia e compare como ele ficou.....eu não tenho como simular aqui, pois aqui é fixo.....

[Alterbridge2010]

O comando retornou isso:

auto lo
iface lo inet loopback

auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider

auto eth0
iface eth0 inet manual

Depois de reiniciar o PC:

auto lo
iface lo inet loopback


auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider

auto eth0
iface eth0 inet manual

[SuporteTecnicoID]

O comando retornou isso:

auto lo
iface lo inet loopback

auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider

auto eth0
iface eth0 inet manual

Depois de reiniciar o PC:

auto lo
iface lo inet loopback


auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider

auto eth0
iface eth0 inet manual

Por favor faça o mesmo usando o KDuXPv1.85x que voce disse que funcionava, para compararmos........

[Dtiger5]

Deixei um recado no CHAT sobre INTERNET q tbm comigo não funcionou.


O Suporte tec pediu p/ mim executar esses códigos : lspci, lsmod, dmeg

*vou deixar aqui os resultados (e espero ancioso alguma solução tô tentando de um tudo mais nada =/)



----------------------------------------------



lspci

00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge

00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge

00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge

00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge

00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge

00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge

00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)

01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] (rev 01)

lsmod

Module Size Used by

binfmt_misc 8356 1

vboxnetadp 80168 0

vboxnetflt 86760 0

vboxdrv 122984 1 vboxnetflt

via 40192 2

drm 159584 3 via

vmnet 43004 13

vmblock 12444 1

vsock 39904 0

vmci 54388 1 vsock

vmmon 73100 0

snd_via82xx 23576 2

gameport 11368 1 snd_via82xx

snd_ac97_codec 101216 1 snd_via82xx

ac97_bus 1532 1 snd_ac97_codec

snd_pcm_oss 37920 0

snd_mixer_oss 16028 1 snd_pcm_oss

snd_pcm 75296 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss

snd_page_alloc 9156 2 snd_via82xx,snd_pcm

snd_mpu401_uart 6940 1 snd_via82xx

snd_seq_dummy 2656 0

snd_seq_oss 28576 0

snd_seq_midi 6432 0

snd_rawmidi 22208 2 snd_mpu401_uart,snd_seq_midi

snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi

iptable_filter 3100 0

ppdev 6688 0

snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event

ip_tables 11692 1 iptable_filter

psmouse 56500 0

parport_pc 31940 1

lp 8964 0

snd_timer 22276 2 snd_pcm,snd_seq

snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq

i2c_viapro 7312 0

x_tables 16544 1 ip_tables

serio_raw 5280 0

shpchp 32272 0

parport 35340 3 ppdev,parport_pc,lp

dm_crypt 12928 0

snd 59204 15 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device

soundcore 7264 1 snd

dm_raid45 84228 0

xor 15620 1 dm_raid45

fbcon 36640 72

tileblit 2460 1 fbcon

font 8124 1 fbcon

bitblit 5372 1 fbcon

softcursor 1756 1 bitblit

vesafb 5696 1

via_rhine 22212 0

mii 5212 1 via_rhine

sata_via 9184 0

via_agp 7932 1

agpgart 34988 2 drm,via_agp

ramzswap 8880 1

xvmalloc 5180 1 ramzswap

lzo_decompress 2620 1 ramzswap

lzo_compress 2300 1 ramzswap

dmesg

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic)

[ 0.000000] KERNEL supported cpus:

[ 0.000000] Intel GenuineIntel

[ 0.000000] AMD AuthenticAMD

[ 0.000000] NSC Geode by NSC

[ 0.000000] Cyrix CyrixInstead

[ 0.000000] Centaur CentaurHauls

[ 0.000000] Transmeta GenuineTMx86

[ 0.000000] Transmeta TransmetaCPU

[ 0.000000] UMC UMC UMC UMC

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfc0000 (usable)

[ 0.000000] BIOS-e820: 000000001bfc0000 - 000000001bfce000 (ACPI data)

[ 0.000000] BIOS-e820: 000000001bfce000 - 000000001bff0000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] DMI 2.3 present.

[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.

[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[ 0.000000] last_pfn = 0x1bfc0 max_arch_pfn = 0x100000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-DFFFF uncachable

[ 0.000000] E0000-EFFFF write-through

[ 0.000000] F0000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000 mask FF0000000 write-back

[ 0.000000] 1 base 010000000 mask FF8000000 write-back

[ 0.000000] 2 base 018000000 mask FFC000000 write-back

[ 0.000000] 3 disabled

[ 0.000000] 4 disabled

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] Scanning 0 areas for low memory corruption

[ 0.000000] modified physical RAM map:

[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)

[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)

[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved)

[ 0.000000] modified: 0000000000100000 - 000000001bfc0000 (usable)

[ 0.000000] modified: 000000001bfc0000 - 000000001bfce000 (ACPI data)

[ 0.000000] modified: 000000001bfce000 - 000000001bff0000 (ACPI NVS)

[ 0.000000] modified: 000000001bff0000 - 000000001c000000 (reserved)

[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] initial memory mapped : 0 - 00c00000

[ 0.000000] init_memory_mapping: 0000000000000000-000000001bfc0000

[ 0.000000] Using x86 segment limits to approximate NX protection

[ 0.000000] 0000000000 - 0000400000 page 4k

[ 0.000000] 0000400000 - 001bc00000 page 2M

[ 0.000000] 001bc00000 - 001bfc0000 page 4k

[ 0.000000] kernel direct mapping tables up to 1bfc0000 @ 10000-15000

[ 0.000000] RAMDISK: 1480c000 - 1500f45f

[ 0.000000] ACPI: RSDP 000f8600 00014 (v00 ACPIAM)

[ 0.000000] ACPI: RSDT 1bfc0000 00030 (v01 A M I OEMRSDT 06000708 MSFT 00000097)

[ 0.000000] ACPI: FACP 1bfc0200 00084 (v02 A M I OEMFACP 06000708 MSFT 00000097)

[ 0.000000] ACPI: DSDT 1bfc0400 03BDB (v01 12345 12345123 00000123 INTL 20051117)

[ 0.000000] ACPI: FACS 1bfce000 00040

[ 0.000000] ACPI: APIC 1bfc0390 0006C (v01 A M I OEMAPIC 06000708 MSFT 00000097)

[ 0.000000] ACPI: OEMB 1bfce040 00060 (v01 A M I AMI_OEM 06000708 MSFT 00000097)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] 0MB HIGHMEM available.

[ 0.000000] 447MB LOWMEM available.

[ 0.000000] mapped low ram: 0 - 1bfc0000

[ 0.000000] low ram: 0 - 1bfc0000

[ 0.000000] node 0 low ram: 00000000 - 1bfc0000

[ 0.000000] node 0 bootmap 00011000 - 000147f8

[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bfc0000]

[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]

[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]

[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]

[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]

[ 0.000000] #4 [001480c000 - 001500f45f] RAMDISK ==> [001480c000 - 001500f45f]

[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]

[ 0.000000] #6 [00008a9000 - 00008ac121] BRK ==> [00008a9000 - 00008ac121]

[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]

[ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]

[ 0.000000] found SMP MP-table at [c00ff780] ff780

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000010 -> 0x00001000

[ 0.000000] Normal 0x00001000 -> 0x0001bfc0

[ 0.000000] HighMem 0x0001bfc0 -> 0x0001bfc0

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[2] active PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x0000009f

[ 0.000000] 0: 0x00000100 -> 0x0001bfc0

[ 0.000000] On node 0 totalpages: 114511

[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000200

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 3951 pages, LIFO batch:0

[ 0.000000] Normal zone: 864 pages used for memmap

[ 0.000000] Normal zone: 109664 pages, LIFO batch:31

[ 0.000000] Using APIC driver default

[ 0.000000] ACPI: PM-Timer IO Port: 0x808

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)

[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 24

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000

[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000

[ 0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e2c00000)

[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 14 pages at c1382000, static data 35612 bytes

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113615

[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-15-generic root=UUID=4bb06915-965d-4618-bab0-6a93716753ec ro splash vga=788 quiet splash

[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)

[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.000000] Enabling fast FPU save and restore... done.

[ 0.000000] Enabling unmasked SIMD FPU exception support... done.

[ 0.000000] Initializing CPU#0

[ 0.000000] allocated 2292160 bytes of page_cgroup

[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)

[ 0.000000] Memory: 435184k/458496k available (4566k kernel code, 22544k reserved, 2142k data, 540k init, 0k highmem)

[ 0.000000] virtual kernel memory layout:

[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)

[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)

[ 0.000000] vmalloc : 0xdc7c0000 - 0xff7fe000 ( 560 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xdbfc0000 ( 447 MB)

[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)

[ 0.000000] .data : 0xc0575b44 - 0xc078d3c8 (2142 kB)

[ 0.000000] .text : 0xc0100000 - 0xc0575b44 (4566 kB)

[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] NR_IRQS:2304 nr_irqs:440

[ 0.000000] Fast TSC calibration failed

[ 0.000000] TSC: PIT calibration matches PMTIMER. 2 loops

[ 0.000000] Detected 2533.315 MHz processor.

[ 0.000035] Console: colour dummy device 80x25

[ 0.000040] console [tty0] enabled

[ 0.000104] Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.63 BogoMIPS (lpj=10133260)

[ 0.000134] Security Framework initialized

[ 0.000163] AppArmor: AppArmor initialized

[ 0.000176] Mount-cache hash table entries: 512

[ 0.000389] Initializing cgroup subsys ns

[ 0.000398] Initializing cgroup subsys cpuacct

[ 0.000405] Initializing cgroup subsys memory

[ 0.000414] Initializing cgroup subsys freezer

[ 0.000418] Initializing cgroup subsys net_cls

[ 0.000447] CPU: Trace cache: 12K uops, L1 D cache: 16K

[ 0.000452] CPU: L2 cache: 256K

[ 0.000456] CPU: Hyper-Threading is disabled

[ 0.000462] mce: CPU supports 4 MCE banks

[ 0.000469] Disabling lock debugging due to kernel taint

[ 0.000484] CPU0: Thermal monitoring enabled (TM1)

[ 0.000492] using mwait in idle threads.

[ 0.000502] Performance Counters: no PMU driver, software counters only.

[ 0.000513] Checking 'hlt' instruction... OK.

[ 0.017305] SMP alternatives: switching to UP code

[ 0.028019] ACPI: Core revision 20090521

[ 0.044398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.084111] CPU0: Intel(R) Celeron(R) CPU 2.53GHz stepping 09

[ 0.088001] Brought up 1 CPUs

[ 0.088001] Total of 1 processors activated (5066.63 BogoMIPS).

[ 0.088001] CPU0 attaching NULL sched-domain.

[ 0.088001] Booting paravirtualized kernel on bare hardware

[ 0.088001] regulator: core version 0.5

[ 0.088001] Time: 11:34:21 Date: 04/12/10

[ 0.088001] NET: Registered protocol family 16

[ 0.088001] EISA bus registered

[ 0.088001] ACPI: bus type pci registered

[ 0.088001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1

[ 0.088001] PCI: Using configuration type 1 for base access

[ 0.088001] bio: create slab <bio-0> at 0

[ 0.088381] ACPI: EC: Look up EC in DSDT

[ 0.102196] ACPI: Interpreter enabled

[ 0.102208] ACPI: (supports S0 S1 S3 S4 S5)

[ 0.102247] ACPI: Using IOAPIC for interrupt routing

[ 0.117709] ACPI Warning: Incorrect checksum in table [OEMB] - 90, should be 8B 20090521 tbutils-246

[ 0.117874] ACPI: No dock devices found.

[ 0.118108] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 0.118193] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]

[ 0.118584] pci 0000:00:01.0: supports D1

[ 0.118649] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]

[ 0.118659] pci 0000:00:0f.0: reg 14 io port: [0xe880-0xe883]

[ 0.118668] pci 0000:00:0f.0: reg 18 io port: [0xe800-0xe807]

[ 0.118677] pci 0000:00:0f.0: reg 1c io port: [0xe480-0xe483]

[ 0.118686] pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]

[ 0.118695] pci 0000:00:0f.0: reg 24 io port: [0xe000-0xe0ff]

[ 0.118792] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]

[ 0.118902] pci 0000:00:10.0: reg 20 io port: [0xdc00-0xdc1f]

[ 0.118937] pci 0000:00:10.0: supports D1 D2

[ 0.118942] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.118948] pci 0000:00:10.0: PME# disabled

[ 0.119013] pci 0000:00:10.1: reg 20 io port: [0xd880-0xd89f]

[ 0.119048] pci 0000:00:10.1: supports D1 D2

[ 0.119051] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.119057] pci 0000:00:10.1: PME# disabled

[ 0.119121] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f]

[ 0.119155] pci 0000:00:10.2: supports D1 D2

[ 0.119158] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.119164] pci 0000:00:10.2: PME# disabled

[ 0.119234] pci 0000:00:10.3: reg 20 io port: [0xd480-0xd49f]

[ 0.119269] pci 0000:00:10.3: supports D1 D2

[ 0.119272] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.119278] pci 0000:00:10.3: PME# disabled

[ 0.119327] pci 0000:00:10.4: reg 10 32bit mmio: [0xfebffc00-0xfebffcff]

[ 0.119383] pci 0000:00:10.4: supports D1 D2

[ 0.119386] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.119392] pci 0000:00:10.4: PME# disabled

[ 0.119476] HPET not enabled in BIOS. You might try hpet=force boot option

[ 0.119548] pci 0000:00:11.5: reg 10 io port: [0xd000-0xd0ff]

[ 0.119606] pci 0000:00:11.5: supports D1 D2

[ 0.119653] pci 0000:00:12.0: reg 10 io port: [0xee00-0xeeff]

[ 0.119662] pci 0000:00:12.0: reg 14 32bit mmio: [0xfebff800-0xfebff8ff]

[ 0.119714] pci 0000:00:12.0: supports D1 D2

[ 0.119717] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.119722] pci 0000:00:12.0: PME# disabled

[ 0.119799] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff]

[ 0.119808] pci 0000:01:00.0: reg 14 32bit mmio: [0xfd000000-0xfdffffff]

[ 0.119833] pci 0000:01:00.0: reg 30 32bit mmio: [0xfeaf0000-0xfeafffff]

[ 0.119858] pci 0000:01:00.0: supports D1 D2

[ 0.119910] pci 0000:00:01.0: bridge 32bit mmio: [0xfca00000-0xfeafffff]

[ 0.119917] pci 0000:00:01.0: bridge 32bit mmio pref: [0xeff00000-0xf7efffff]

[ 0.119928] pci_bus 0000:00: on NUMA node 0

[ 0.119938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.120250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

[ 0.133932] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 0.134113] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 0.134285] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 0.134452] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.134624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.134795] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.134965] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.135136] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.135465] SCSI subsystem initialized

[ 0.135590] libata version 3.00 loaded.

[ 0.135751] usbcore: registered new interface driver usbfs

[ 0.135792] usbcore: registered new interface driver hub

[ 0.135850] usbcore: registered new device driver usb

[ 0.136151] ACPI: WMI: Mapper loaded

[ 0.136156] PCI: Using ACPI for IRQ routing

[ 0.136403] Bluetooth: Core ver 2.15

[ 0.136498] NET: Registered protocol family 31

[ 0.136502] Bluetooth: HCI device and connection manager initialized

[ 0.136507] Bluetooth: HCI socket layer initialized

[ 0.136510] NetLabel: Initializing

[ 0.136513] NetLabel: domain hash size = 128

[ 0.136515] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.136537] NetLabel: unlabeled traffic allowed by default

[ 0.139177] pnp: PnP ACPI init

[ 0.139217] ACPI: bus type pnp registered

[ 0.150296] pnp: PnP ACPI: found 13 devices

[ 0.150302] ACPI: ACPI bus type pnp unregistered

[ 0.150308] PnPBIOS: Disabled by ACPI PNP

[ 0.150337] system 00:08: ioport range 0xa00-0xa0f has been reserved

[ 0.150342] system 00:08: ioport range 0x290-0x29f has been reserved

[ 0.150346] system 00:08: ioport range 0xa20-0xa2f has been reserved

[ 0.150349] system 00:08: ioport range 0xa30-0xa3f has been reserved

[ 0.150353] system 00:08: ioport range 0xa40-0xa4f has been reserved

[ 0.150364] system 00:09: ioport range 0x3e0-0x3e7 has been reserved

[ 0.150368] system 00:09: ioport range 0x4d0-0x4d1 has been reserved

[ 0.150372] system 00:09: ioport range 0x800-0x87f has been reserved

[ 0.150375] system 00:09: ioport range 0x400-0x41f has been reserved

[ 0.150386] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved

[ 0.150391] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved

[ 0.150400] system 00:0c: iomem range 0x0-0x9ffff could not be reserved

[ 0.150404] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved

[ 0.150408] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved

[ 0.150412] system 00:0c: iomem range 0x100000-0x1bffffff could not be reserved

[ 0.150416] system 00:0c: iomem range 0xff380000-0xffffffff has been reserved

[ 0.185186] AppArmor: AppArmor Filesystem Enabled

[ 0.185225] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[ 0.185229] pci 0000:00:01.0: IO window: disabled

[ 0.185237] pci 0000:00:01.0: MEM window: 0xfca00000-0xfeafffff

[ 0.185243] pci 0000:00:01.0: PREFETCH window: 0xeff00000-0xf7efffff

[ 0.185265] pci 0000:00:01.0: setting latency timer to 64

[ 0.185273] pci_bus 0000:00: resource 0 io: [0x00-0xffff]

[ 0.185277] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]

[ 0.185281] pci_bus 0000:01: resource 1 mem: [0xfca00000-0xfeafffff]

[ 0.185285] pci_bus 0000:01: resource 2 pref mem [0xeff00000-0xf7efffff]

[ 0.185346] NET: Registered protocol family 2

[ 0.185507] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.185951] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[ 0.186054] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)

[ 0.186161] TCP: Hash tables configured (established 16384 bind 16384)

[ 0.186166] TCP reno registered

[ 0.186387] NET: Registered protocol family 1

[ 0.186505] Trying to unpack rootfs image as initramfs...

[ 0.517477] Freeing initrd memory: 8205k freed

[ 0.529568] cpufreq-nforce2: No nForce2 chipset.

[ 0.529617] Scanning for low memory corruption every 60 seconds

[ 0.529811] audit: initializing netlink socket (disabled)

[ 0.529839] type=2000 audit(1271072061.528:1): initialized

[ 0.540516] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 0.542415] VFS: Disk quotas dquot_6.5.2

[ 0.542527] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.543425] fuse init (API version 7.12)

[ 0.543578] msgmni has been set to 866

[ 0.543995] alg: No test for stdrng (krng)

[ 0.544047] io scheduler noop registered

[ 0.544051] io scheduler anticipatory registered

[ 0.544054] io scheduler deadline registered

[ 0.544157] io scheduler cfq registered (default)

[ 0.544186] pci 0000:00:01.0: disabling DAC on VIA PCI bridge

[ 0.544279] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message

[ 0.544291] pci 0000:01:00.0: Boot video device

[ 0.544430] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 0.544473] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 0.544680] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[ 0.544686] ACPI: Power Button [PWRF]

[ 0.544778] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1

[ 0.544787] ACPI: Sleep Button [SLPB]

[ 0.544856] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2

[ 0.544863] ACPI: Power Button [PWRB]

[ 0.545545] processor LNXCPU:00: registered as cooling_device0

[ 0.545553] ACPI: Processor [CPU0] (supports 16 throttling states)

[ 0.553712] isapnp: Scanning for PnP cards...

[ 0.688044] Switched to high resolution mode on CPU 0

[ 0.908303] isapnp: No Plug & Play device found

[ 0.910027] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.910175] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.910769] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.912299] brd: module loaded

[ 0.912986] loop: module loaded

[ 0.913173] input: Macintosh mouse button emulation as /devices/virtual/input/input3

[ 0.913997] pata_via 0000:00:0f.1: version 0.3.4

[ 0.914030] alloc irq_desc for 20 on node -1

[ 0.914034] alloc kstat_irqs on node -1

[ 0.914046] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20

[ 0.914334] scsi0 : pata_via

[ 0.914517] scsi1 : pata_via

[ 0.917712] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14

[ 0.917718] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15

[ 0.918129] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20

[ 0.918195] pata_acpi 0000:00:0f.0: PCI INT B disabled

[ 0.918660] Fixed MDIO Bus: probed

[ 0.918719] PPP generic driver version 2.4.2

[ 0.918911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.918961] alloc irq_desc for 21 on node -1

[ 0.918965] alloc kstat_irqs on node -1

[ 0.918976] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21

[ 0.919001] ehci_hcd 0000:00:10.4: EHCI Host Controller

[ 0.919108] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1

[ 0.919193] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebffc00

[ 0.928018] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00

[ 0.928156] usb usb1: configuration #1 chosen from 1 choice

[ 0.928205] hub 1-0:1.0: USB hub found

[ 0.928221] hub 1-0:1.0: 8 ports detected

[ 0.928327] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 0.928367] uhci_hcd: USB Universal Host Controller Interface driver

[ 0.928445] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21

[ 0.928459] uhci_hcd 0000:00:10.0: UHCI Host Controller

[ 0.928558] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2

[ 0.928591] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00

[ 0.928736] usb usb2: configuration #1 chosen from 1 choice

[ 0.928783] hub 2-0:1.0: USB hub found

[ 0.928799] hub 2-0:1.0: 2 ports detected

[ 0.928887] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21

[ 0.928900] uhci_hcd 0000:00:10.1: UHCI Host Controller

[ 0.928980] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3

[ 0.929013] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d880

[ 0.929144] usb usb3: configuration #1 chosen from 1 choice

[ 0.929196] hub 3-0:1.0: USB hub found

[ 0.929209] hub 3-0:1.0: 2 ports detected

[ 0.929297] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21

[ 0.929313] uhci_hcd 0000:00:10.2: UHCI Host Controller

[ 0.929385] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4

[ 0.929419] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800

[ 0.929551] usb usb4: configuration #1 chosen from 1 choice

[ 0.929596] hub 4-0:1.0: USB hub found

[ 0.929609] hub 4-0:1.0: 2 ports detected

[ 0.929710] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21

[ 0.929722] uhci_hcd 0000:00:10.3: UHCI Host Controller

[ 0.929800] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5

[ 0.929833] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d480

[ 0.929978] usb usb5: configuration #1 chosen from 1 choice

[ 0.930024] hub 5-0:1.0: USB hub found

[ 0.930039] hub 5-0:1.0: 2 ports detected

[ 0.930202] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

[ 0.930680] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.930693] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.930816] mice: PS/2 mouse device common for all mice

[ 0.930999] rtc_cmos 00:02: RTC can wake from S4

[ 0.931063] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

[ 0.931128] rtc0: alarms up to one year, y3k, 114 bytes nvram

[ 0.931327] device-mapper: uevent: version 1.0.3

[ 0.931539] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com

[ 0.931713] device-mapper: multipath: version 1.1.0 loaded

[ 0.931718] device-mapper: multipath round-robin: version 1.0.0 loaded

[ 0.931982] EISA: Probing bus 0 at eisa.0

[ 0.932054] EISA: Detected 0 cards.

[ 0.932157] cpuidle: using governor ladder

[ 0.932163] cpuidle: using governor menu

[ 0.933014] TCP cubic registered

[ 0.933230] NET: Registered protocol family 10

[ 0.933950] lo: Disabled Privacy Extensions

[ 0.934470] NET: Registered protocol family 17

[ 0.934521] Bluetooth: L2CAP ver 2.13

[ 0.934524] Bluetooth: L2CAP socket layer initialized

[ 0.934528] Bluetooth: SCO (Voice Link) ver 0.6

[ 0.934530] Bluetooth: SCO socket layer initialized

[ 0.934602] Bluetooth: RFCOMM TTY layer initialized

[ 0.934607] Bluetooth: RFCOMM socket layer initialized

[ 0.934610] Bluetooth: RFCOMM ver 1.11

[ 0.934671] Using IPI No-Shortcut mode

[ 0.934821] PM: Resume from disk failed.

[ 0.934846] registered taskstats version 1

[ 0.935023] Magic number: 6:84:580

[ 0.935072] pci_bus 0000:01: hash matches

[ 0.935149] rtc_cmos 00:02: setting system clock to 2010-04-12 11:34:22 UTC (1271072062)

[ 0.935155] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 0.935158] EDD information not available.

[ 0.949801] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4

[ 1.088422] ata1.01: ATAPI: SONY DVD RW AW-Q170A, 1.73, max UDMA/66

[ 1.104310] ata1.01: configured for UDMA/66

[ 1.105522] scsi 0:0:1:0: CD-ROM SONY DVD RW AW-Q170A 1.73 PQ: 0 ANSI: 5

[ 1.108271] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray

[ 1.108279] Uniform CD-ROM driver Revision: 3.20

[ 1.108444] sr 0:0:1:0: Attached scsi CD-ROM sr0

[ 1.108567] sr 0:0:1:0: Attached scsi generic sg0 type 5

[ 1.464368] ata2.00: HPA unlocked: 156299375 -> 156301488, native 156301488

[ 1.464377] ata2.00: ATA-7: MAXTOR STM3802110A, 3.AAJ, max UDMA/100

[ 1.464382] ata2.00: 156301488 sectors, multi 16: LBA48

[ 1.510350] ata2.00: configured for UDMA/100

[ 1.510545] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5

[ 1.510764] sd 1:0:0:0: Attached scsi generic sg1 type 0

[ 1.510863] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)

[ 1.510962] sd 1:0:0:0: [sda] Write Protect is off

[ 1.510967] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.511015] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.511286] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >

[ 1.599098] sd 1:0:0:0: [sda] Attached SCSI disk

[ 1.599129] Freeing unused kernel memory: 540k freed

[ 1.599877] Write protecting the kernel text: 4568k

[ 1.599916] Write protecting the kernel read-only data: 1836k

[ 1.814117] ramzswap: disk size set to 111060 kB

[ 1.915392] Linux agpgart interface v0.103

[ 1.918866] agpgart: Detected VIA VT3314 chipset

[ 2.006901] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000

[ 2.006945] sata_via 0000:00:0f.0: version 2.4

[ 2.006962] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20

[ 2.007021] sata_via 0000:00:0f.0: routed to hard irq line 11

[ 2.007171] scsi2 : sata_via

[ 2.007308] scsi3 : sata_via

[ 2.009923] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 20

[ 2.009928] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 20

[ 2.042815] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker

[ 2.042899] alloc irq_desc for 23 on node -1

[ 2.042903] alloc kstat_irqs on node -1

[ 2.042915] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 2.047819] eth0: VIA Rhine II at 0xfebff800, 00:19:21:9f:f8:b6, IRQ 23.

[ 2.048535] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.

[ 2.151749] Adding 111056k swap on /dev/ramzswap0. Priority:100 extents:1 across:111056k SSD

[ 2.243145] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)

[ 2.472022] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)

[ 3.079415] vesafb: framebuffer at 0xf0000000, mapped to 0xdc900000, using 960k, total 960k

[ 3.079421] vesafb: mode is 800x600x16, linelength=1600, pages=0

[ 3.079424] vesafb: scrolling: redraw

[ 3.079430] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

[ 3.079522] fb0: VESA VGA frame buffer device

[ 3.089795] Console: switching to colour frame buffer device 100x37

[ 3.375547] xor: automatically using best checksumming function: pIII_sse

[ 3.392009] pIII_sse : 3891.000 MB/sec

[ 3.392013] xor: using function: pIII_sse (3891.000 MB/sec)

[ 3.397040] device-mapper: dm-raid45: initialized v0.2594b

[ 3.905176] PM: Starting manual resume from disk

[ 3.905184] PM: Resume from partition 8:5

[ 3.905186] PM: Checking hibernation image.

[ 3.916020] PM: Resume from disk failed.

[ 6.415272] Adding 634528k swap on /dev/sda5. Priority:-1 extents:1 across:634528k

[ 6.870238] udev: starting version 147

[ 10.761291] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 10.859906] lp: driver loaded but no devices found

[ 10.909620] parport_pc 00:07: reported by Plug and Play ACPI

[ 10.909715] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]

[ 11.004279] lp0: using parport0 (interrupt-driven).

[ 11.059229] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 11.120123] ppdev: user-space parallel port driver

[ 11.243486] psmouse serio1: ID: 10 00 64

[ 11.494035] type=1505 audit(1271082873.056:2): operation="profile_load" pid=831 name=/usr/share/gdm/guest-session/Xsession

[ 11.703253] type=1505 audit(1271082873.264:3): operation="profile_load" pid=836 name=/sbin/dhclient3

[ 11.704232] type=1505 audit(1271082873.268:4): operation="profile_load" pid=836 name=/usr/lib/NetworkManager/nm-dhcp-client.action

[ 11.704731] type=1505 audit(1271082873.268:5): operation="profile_load" pid=836 name=/usr/lib/connman/scripts/dhclient-script

[ 11.807305] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5

[ 11.962512] type=1505 audit(1271082873.524:6): operation="profile_load" pid=837 name=/usr/bin/evince

[ 11.977940] type=1505 audit(1271082873.540:7): operation="profile_load" pid=837 name=/usr/bin/evince-previewer

[ 12.001506] type=1505 audit(1271082873.564:8): operation="profile_load" pid=837 name=/usr/bin/evince-thumbnailer

[ 12.005493] alloc irq_desc for 22 on node -1

[ 12.005499] alloc kstat_irqs on node -1

[ 12.005511] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22

[ 12.005680] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64

[ 12.068740] type=1505 audit(1271082873.632:9): operation="profile_load" pid=850 name=/usr/bin/freshclam

[ 12.087318] type=1505 audit(1271082873.648:10): operation="profile_load" pid=851 name=/usr/lib/cups/backend/cups-pdf

[ 12.088468] type=1505 audit(1271082873.652:11): operation="profile_load" pid=851 name=/usr/sbin/cupsd

[ 13.724192] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

[ 18.072352] /dev/vmmon[1207]: Module vmmon: registered with major=10 minor=165

[ 18.072365] /dev/vmmon[1207]: Module vmmon: initialized

[ 18.231992] /dev/vmci[1215]: VMCI: Driver initialized.

[ 18.232147] /dev/vmci[1215]: Module vmci: registered with major=10 minor=55

[ 18.232152] /dev/vmci[1215]: Module vmci: initialized

[ 20.167936] /dev/vmnet: open called by PID 1258 (vmnet-bridge)

[ 20.167955] /dev/vmnet: hub 0 does not exist, allocating memory.

[ 20.167991] /dev/vmnet: port on hub 0 successfully opened

[ 20.168068] bridge-eth0: up

[ 20.168076] bridge-eth0: attached

[ 21.554975] /dev/vmnet: open called by PID 1269 (vmnet-dhcpd)

[ 21.554995] /dev/vmnet: hub 1 does not exist, allocating memory.

[ 21.555030] /dev/vmnet: port on hub 1 successfully opened

[ 21.624442] /dev/vmnet: open called by PID 1271 (vmnet-netifup)

[ 21.624467] /dev/vmnet: port on hub 1 successfully opened

[ 21.716705] /dev/vmnet: open called by PID 1275 (vmnet-dhcpd)

[ 21.716727] /dev/vmnet: hub 8 does not exist, allocating memory.

[ 21.716762] /dev/vmnet: port on hub 8 successfully opened

[ 21.819316] /dev/vmnet: open called by PID 1279 (vmnet-natd)

[ 21.819343] /dev/vmnet: port on hub 8 successfully opened

[ 21.896871] /dev/vmnet: open called by PID 1280 (vmnet-netifup)

[ 21.896902] /dev/vmnet: port on hub 8 successfully opened

[ 23.073159] [drm] Initialized drm 1.1.0 20060810

[ 23.146200] alloc irq_desc for 16 on node -1

[ 23.146206] alloc kstat_irqs on node -1

[ 23.146219] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 23.146685] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0

[ 23.422196] agpgart-via 0000:00:00.0: AGP 3.5 bridge

[ 23.422233] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode

[ 23.422323] pci 0000:01:00.0: putting AGP V3 device into 8x mode

[ 24.240014] eth0: no IPv6 routers present

[ 26.325502] vboxdrv: Trying to deactivate the NMI watchdog permanently...

[ 26.325511] vboxdrv: Successfully done.

[ 26.325513] vboxdrv: Found 1 processor cores.

[ 26.325750] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[ 26.325754] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).

[ 31.672038] vmnet1: no IPv6 routers present

[ 32.636033] vmnet8: no IPv6 routers present

[ 300.000025] Machine check events logged

[Alterbridge2010]

Talvez com a versão final o problema se resolva.....

[SuporteTecnicoID]

Talvez com a versão final o problema se resolva.....

Infelismente não consegui simular sem os hardwares, no entanto implementei varias outras configurações,,,,vamos começar novamente do zero, testem assim que for Liberada a nova versão KDuXPv1.97 Final.....

Obrigado por sua apreciação, participem tambem da promoção, Fotografe com o KDuXP, e podera ganhar uma camera com qualquer valor de incentivo ao projeto a partir de R$ 5,00.